|
VP 9101 - Precision Syringe Pump |
 | OEM Application in Microliter Dosage
* Rugged design
* High precision
* Small form factor
* Low weight
* Good compatability of
- geometry
- control
Catalog number 2709101
| Software Download |
| Power requirements: | Supply voltage: | 24VDC ± 5V | | | | Currents: | Max.1A
| | | Resolution: | | 3000 steps | | | Plunger drive: | Principle: | Quad encoder for loss of steps, detection of loss steps with error message
| | | | Travel: | 30mm | | | Plunger speed: | | 1.2 sec. - 20 min./full stroke (speed ranges vary depending on syringe size and tubing) | | | | | | Syringes: | Type: | XP: 50µl, 100µl, 250µl, 500µl, 1.0ml, 2.5ml, 5.0ml | | |  | Imprecision: |  0.05% CV within run at full stroke (for 1000µl syringe and above) | | Inaccuracy: | <1.0% at full stroke | | Fluid contact: | Glass, PCTFE and Teflon | | | | | | Valve/valve drive: | Valve options: | 120° 3-port distribution | | | 
| Turn time: | 250ms between adjacent ports | | Drive: | Stepper motor with optical sensor for position detection
| | Positions: | Input, output, bypass | | Materials: | Plug: virgin teflon
Body: PCTFE | | Fittings: | 1/4-28"-UNF screw fitting for syringe | | | | | | Interface: | Type: | RS 232, RS 485 or CAN bus | | | | Baudrate: | 9.600 or 38.400, 100K or 125K (CAN bus)
| | | | Format: | Data bits: 8 parity: none
Stop bits: 1 half duplex | | | | Addressing: | up to 15 XP/AL devices can be addressed individually | | | | Communication: | Data terminal and OEM protocol | | | Firmware: | | Programmable ramps, cutoffs, backlash compensation, plunger speeds, delays and loops
Arbitrarily selectable plunger speed
Clearance compensation
Absolute and relative positions
Diagnostics
Flash-PROM | | | Environmental: | | Temperature: 17-37°C
Humidity: 10-85%
Non condensing RH at: 5°C-40°C | | | Dimensions: | Height: | 127mm (+)1mm
| | | | Width: | 45mm (+)1mm
| | | | Depth: | 113mm | | | | Weight: | 1.2kg |
|
