Syringe Cleaning

 
Before first use:
 
  • Prime the syringe approximately 10 times
        with the intended medium for application.
    •  
    After use:
     
  • Clean the syringe thoroughly,
        preferably in an ultrasonic bath.
  • Wipe the plunger with a non-fibre shedding cloth,
        holding it by the handle.
  • Flush syringe with acetone or methanol
        and dry with pressurized air or vacuum.
  • Only insert plunger when the syringe is completely dry.
    •  
    Do not heat above 60°C
  • For higher temperatures use special ILS syringes.
    •  
     
    Home / Products and Services / Syringes / Technical Information