* Rugged design
* High precision
* Small form factor
* Low weight
* Good compatability of
- geometry
- control
Catalog number 2709101
|
|
OEM Application in Microliter
Dosage * Rugged design * High precision * Small form factor * Low weight * Good compatability of - geometry - control Catalog number 2709101 |
| Power requirements: | Supply voltage: | 24VDC ± 5V |
| Currents: | Max.1A |
|
| Resolution: | 3000 steps | |
| Plunger drive: | Principle: | Quad encoder for loss of steps, detection of loss steps with
error message |
| Travel: | 30mm | |
| Plunger speed: | 1.2 sec. - 20 min./full stroke (speed ranges vary depending on syringe size and tubing) | |
| Syringes: | Type: | XP: 50µl, 100µl, 250µl, 500µl, 1.0ml, 2.5ml, 5.0ml |
 |
Imprecision: |  0.05% CV within run at full
stroke (for 1000µl syringe and above) |
| Inaccuracy: | <1.0% at full stroke | |
| Fluid contact: | Glass, PCTFE and Teflon | |
| Valve/valve drive: | Valve options: | 120° 3-port distribution |
 |
Turn time: | 250ms between adjacent ports |
| Drive: | Stepper motor with optical sensor for position detection |
|
| Positions: | Input, output, bypass | |
| Materials: | Plug: virgin teflon Body: PCTFE |
|
| Fittings: | 1/4-28"-UNF screw fitting for syringe | |
| Interface: | Type: | RS 232, RS 485 or CAN bus |
| Baudrate: | 9.600 or 38.400, 100K or 125K (CAN bus) |
|
| Format: | Data bits: 8 parity: none Stop bits: 1 half duplex |
|
| Addressing: | up to 15 XP/AL devices can be addressed individually | |
| Communication: | Data terminal and OEM protocol | |
| Firmware: | Programmable ramps, cutoffs, backlash compensation, plunger
speeds, delays and loops Arbitrarily selectable plunger speed Clearance compensation Absolute and relative positions Diagnostics Flash-PROM |
|
| Environmental: | Temperature: 17-37°C Humidity: 10-85% Non condensing RH at: 5°C-40°C |
|
| Dimensions: | Height: | 127mm (+)1mm |
| Width: | 45mm (+)1mm |
|
| Depth: | 113mm | |
| Weight: | 1.2kg | |